DSE Moisture Solutions will be exhibiting on the Processbio booth at the up-coming

International Biomass Conference & Expo,

Minneapolis Convention Center, Minnesota.

April 8-10. 2013

Please meet us at booth no. 505-507, there Managing Director Peder Lomborg will demonstrate various Moisture Meter models and solutions.

 

 

CWIEME Berlin, Germany

The worlds largest International Coil Winding, Insulations & Electrical Manufactoring Exhibition is taking place from 4 - 6 june 2013 in Berlin. DSE Test Solutions is participating with our wire team and you can find us at booth number 4016.

-Read more here

New moisture meter model ready for straw suppliers

The new Moisture Meter model DSE4200 is now ready for the market. The model has been developed for straw suppliers in order to for them to measure the straw while it is being harvested on the field.

-Read more here.

 

 

Software department CLD certified in LabVIEW

A major goal was achieved in 2012 then the CLD certification in LabVIEW from National Instruments was accomplished. “We are very proud by the fact that every programmer in our software department now are certified LabVIEW developers, and we are happy that we now are able to document the very high level of competence our developers poses ”, Managing Director Peder Lomborg says.

 

 

ATEX DSE4101ex zone 22 is now available

We are pleased to announce that our DSE4101 is now available in an ATEX zone 22 version, with the following ex specifications:

Ex tc IIIB T120° C Dc IP65

According to:
EN 60079-0
EN 60079-31

For further information see datasheet.

 

New employee at DSE Test Solutions

DSE Test Solutions has employed a new colleague, Rasmus Houtved.

Rasmus is 28 years old and works with different aspects of electronic design.
After having been a service technician for some years, Rasmus decided to go back to school to study as an engineer, and has recently finished his bachelor in Electronic Engineering.

Rasmus will be joining DSE Test Solutions' electronic development team.

 

E12 in Odense, Denmark

The 11 - 13 September DSE Test Solutions will participate at The E12 exhibition in Odense, Denmark.

Our Sales Manager Rene Madsen will together with our Managing Director Peder Lomborg be at our booth and they are available for all visitors to explain and discuss our different test solutions.

We are located at booth number 3736.

 

WIRE CHINA 2012 in Shanghai

DSE Test Solutions A/S will be exhibiting at Wire China from 25 – 28 September 2012.

You will find us at booth number W2D41 where we will demonstrate the latest versions of our Tangent Delta testers TD5 and our unique inline DSE HVC Flex, High Voltage Continuity Inline Tester.

The participants from DSE Test Solutions A/S will be our agent for the Chineese market Mr. Peng Qingxuan and Managing Director Mr. Peder Lomborg.

 

WIRE Düsseldorf, Germany

DSE Test Solutions A/S will be exhibiting at Wire Düsseldorf from 26 – 30 March 2012.

You will find us in hall 09 at stand no. 9F31. where we will demonstrate the latest versions of our Tangent Delta testers TD5 and our unique inline DSE HVC Flex, High Voltage Continuity Inline Tester.

The participants from DSE Test Solutions A/S will be our Managing Director Mr. Peder Lomborg and our Sales Representatives from our Wire Solutions department.

DSE Test Solutions, ISO 9001-2008 certified.

On October 26, DSE Test Solutions was certified in accordance with the 2008 version of the ISO 9001 quality management systems standard ”We have been working in accordance with our quality management systems since the acquisition of the company in 2009, but it is of course very satisfying to receive the official certificate”, says general manger Peder Lomborg.

Newsletter Wire September 2011

-Read more here

Newsletter Test September 2011

-Read more here

 

DSE Test Solutions A/S is attending NI days in Stockholm and Copenhagen.

On September 20, DSE Test Solutions will have a stand at NI Days in Stockholm. Area Sales Manager Rene Madsen is attending the seminar exhibiting a range of Tescom products.

NI days in Copenhagen is on October 13 and Peder Lomborg and Rene Madsen will be attending the seminar, where Peder Lomborg gives a presentation about the use of LabView in the test of the curing of enamelled copperwire.

This case story will describe the challenges of making a mechatronics instrument for worldwide use, and why it is important to test

enamelled copper wire to secure the lifetime of transformers, generators and electrical motors.

Rene Madsen will exhibit a range of Tesom products during the seminar.

To sign up for the NI-day conference, please go to www.ni-days.com.

 

TEST ENGINE - UPGRADED TO NEW STANDARDS

DSE Test Engine (TE) 6.0 is released based on LabView 2010 and runs on Windows 7.

Main features of TE 6.0:

• TE supports all the newest drivers from NI LabView 2010
• Updated help menus and files for the GUI, Sequence editor, Variable editor, Tester capability (test management) etc.
• New “stop function” is implemented in the Resource editor stopping loops in debug mode.
• Upgraded Step-description editor (floating).
• Updated security configuration within the GUI in order to setup ”Logoff” parameters.
• Upgraded GUI functions to avoid activation of “soft-buttons” during test.
• Upgraded Service Counter.
• Enhanced stability during editing plus various functional resource updates.

 

 

WIRE Southeast Asia, Bangkok

DSE TestSolutions A/S will together with our agent PT Business Network be exhibiting at Wire Southeast Asia, Bangkok from 13 – 15 September 2011.

You will find us in Singapore hall at stand no. L27., where we will demonstrate the latest versions of our Tangent Delta testers TD5 and our unique inline DSE HVC Flex, High Voltage Continuity Inline Tester.

The representative from DSE TestSolutions A/S will be Area Sales Manager Mr. Marius Rasmussen.

 

Watch system sold to Swedish customer

-Read more here

Newsletter May 2011

-Read more here

 

New engineer in the electrical department

Due to increased activitiy in our order stock, we are very pleased to welcome Finn Christensen as a new electrical engineer in our electrical department.

Finn has a long and wide-ranging experience from the electronics industry and he displays a very high level of craftsmanship.

Finn will mainly take care of the assembling of the electrical part of our test systems and assembling and service of our wire instruments.

New employee in the software department

DSE Test Solutions has employed a new colleague, Marck Holm Hansen. Marck is 23 years old and works with different aspects of computer science. Marck has recently finished his bachelor in information technology and he will be joining DSE Test Solutions' software development team.